Wiring jobb

I'm trying to get rid of all the electrical parts with I don't need. I'll keep the Speedo and the Neutral light....

Hi guys, new around here, i own 2011 600. I got it home and figured I’d start looking a little deeper. I decided to look at the air cleaner to be sure it didn’t need replaced. It was a K&N that was pr...

I would consider our efforts over the past ten years of taking unwanted mechanical ‘tat’ and resurrecting it into shiny, mobile old ‘tat’ qualifies us as restoration ‘veterans’ or at least ‘regulars’....

05-06 ZX-6R   Whether you have recently received a freshly converted harness or are working with a more seasoned harness, you may find it useful to familiarize yourself with the harnes...

Throttle Position Sensor ...

Today I took off all of the wiring on the bike. I just had to disconnect all of the wires from their connections and I was done. I had to take the headlight off because all of the wires centralized in...

Started to look at the wiring harness a week or so ago. The wiring on this bike consists of two main wiring harnesses.  One connects to the stuff in the headlight shell as well as the front...

The fourth replacement wire had a bullet connector on the other end to interconnect with the rear harness. The replacement connector ia not identical to the original, but is compatible. This bullet...

Ok……wiring is definitely not my strong point……..I can tig weld two razor blades together, but can’t solder worth a shit, have always gone to the local hardware store for blister packs of crappy connec...

I had previously refurbished the original wire harnesses on tjis bike by removing what was left of the woven loom and replacing it with an expandable braided sleeve material with heat shrink at the jo...

Very easy install had it done in less than an hour! Very happy with the resuluts!...

After installing a custom 1/4” SS license plate mount and LED frame, my integrated LED taillight went into an error mode. After several tests, I’ve concluded the LED frame messed up the signals with t...

Some people started fixing it not knowing it is the bike repair that just wont end, yes it goes on and on my friend…. :) hope you hear the song...

Well after discovering we were using a 79 schematic for a 78, lol and then that the engine was a 77… now it gets fun! Thankfully , PackRat and Trog like biker angels come the the rescue. Stay tuned!...

Coils get their connections, and a branch runs up to the condensers....