How difficult to build a kit model?

The process of building in the pics:...

The beginning of the process....Just got the rear R1 subframe back from my mates, he's just welded some extender blocks inside the tubular subframe, needs cleaning up before I get some cross members w...

Purchased a Gilera 150 headlight front headlight. for my fighter....

Radiator and Front headlight brackets need modifying,...

Modified Radiator hoses and fittings done.Silicone top hose mounted to new re positioned top mount, connected to new ZX636 Rad sprayed Black...

VFR 800 Fitted with all new bearings and bushes....

All stripped Down again.Having just finished the rear end, or so i thought all torqued up ,wheel fitted new Cush rubbers fitted all nice and tight and by tight i mean the Chain would tear the tyres to...

Carburettors now fitted with Conical Fliters....

Front end Change....

Steering Damper adapter spacer made...

After receiving so many enquiries about the building of these bikes i have finally got round to going through step by step on the whole process....

The fuel tank on both bikes came from an early (1980's?????) Honda CG125 Which will require a small amount of work underneath on the tap side in order for the tank to sit down enough to get it level w...

Engine Up to you this one but if you bought a good bike to begin with then all you need do is paint it! PJ1 satin engine paint was used and if you follow the directions to the letter you should be f...

The majority of the dominators electrical components CDI, fuse box etc are housed in the now departed fairing. In order to keep the wiring at the headlight to a minimum i simply pulled everything back...

Ever heard of a Volkspod? Inspired by the creator, Brent Walter, I will share with you a step-by-step guide on how I created my own Volkswagen electric mini-bike. Also shout-out to UltimateRebuilds fo...

This is a step by step video including torque specs....

¡ ¡ ¡ ! ! !...