Today my dad and I tried to get the motorcycle to run. I mounted the carburetor then checked if it had spark, compression and fuel. It had all three of these things. However, the motorcycle, for a rea...

Wiring the RR We earlier prepared a nice long loom to go on the bike, now it is time to fit it. Plug the two multiplugs onto the RR. Note I left the stock plugs in place, I have no intention of...

Super impressed about every aspect of this company so far nothing cheap here these are heavy duty and quality they make each kit for your year and model bike with plug and play wiring harness parts an...

Fitting the New RR  Remove the two 10mm bolts holding it to the frame...

Had my first proper trip this year to the Lake District, and my longest ride to date. Totalled 270 miles round trip, definitely need a bigger seat....

On the Bike On the bike, our first job is to remove the front fairing so we can access things. It should take about 20-30 minutes to remove, I’ve done a separate document for this as it is neede...

Portal do Inferno (Serra da Arada, Portugal)...

It seems to be a filter. Don’t think I can reuse this one. Any recommendations for replacement?...

Today my dad and I went to look at a 1970 Triumph tr25w. The motorcycle didn't come with a couple of its parts including the carburetor and the gas tank. There were only 5,775 miles on it since it was...

Introduction Hopefully this will help people who decide to tackle the regulator/rectifier (RR) issues on their VFR. This work is being carried out on a 2003 VFR 800 but the process should be pretty...

The arrow can be removed, I'm trying, but it holds on very tightly. I checked all the wires and all the contacts, + and - everything comes to the board but it doesn’t go further along the board........

Since originally posting this guide several owners, including myself, have come across an issue when removing the lower dome head on the side panel. ...

The part of the job I found most daunting was removal of the side panels. Ive knocked up a guide to try to help anyone else thinking of removing these. This is only a guide based on my experiance, pl...

-Front wheel, brake caliper and fork guards off -Loosen top triple clamp bolts and break the caps loose -Remove forks and unscrew the caps the rest of the way -Pull down the fork spring and insert...

I think it's going to be a bit louder than the ridiculously quite standard Akrapovic....

I recently had to replace the headlamp relay which meant removing all the front fairings, so I decided to change the oil and filters while I was at it. After ordering the filters, I discovered t...

But I'm guessing there's a few out there (like me) who haven't got a clue! The first thing to note, is that it is DEAD EASY! If you know how to first of all remove the big fairings, you're 90% done!...

What you need 1) LED Indicator Flasher Relay For Honda VFR 800 2002-2009 Fast Flash Fix...