The “Sled” is coming along. When I have spare time in between Rover projects I tinker with the old Triumph. Recent additions are 13″ Hagon shocks, a raw aluminum fender from Speed and Sport, and a Web...

Lat night I switched the 2-up footrests back to the standard solo rearsets. Very simple switch on the left side, a bit trickier on the right side. The left rearset just bolts on, but the right needs t...

Evening everyone! Just wanted to share something I just found out about the drivetrain. The chain sliders had uneven wear so I changed them and also bought new chain rings and chain... Some kms have...

Nate was kind enough to sand blast the tank and fenders extremely quickly. I have pictures of the tank but not the fenders because we decided to take the tank home to fix a crack in the front of the t...

Ready to button up the crank case, I think. A final wash to try to get rid of any crud in the crannies:...

It would ordinarily be a bit premature to change the air filter element, but my recent trip had me concerned. I rode on a number of dirt roads through a bunch of fine dust and I suspected that my filt...

OK - here's what I'm trying to emulate - quite rare and I don't even know if these were exported to the US, but in 1980 a small run of these bikes were produced. They have a pig ugly exhaust, 21 inch...

Hello everyone! You and I continue to work on the Sandy project - a small scrambler based on the Yamaha YBR125 motorcycle....

?...

  "Level one, museum-like condition, plus extras" This was how the condition of my 1990 GB500 was described by the previous owner in the Ebay listing. This would turn out to be false. It's been...

I was in dire need of having GPS readily available on the bike. I opted for the EvoTech Quadlock mount as I preferred the aesthetics over the Quadlock options and it mounts to the ignition cover direc...

The first thing I wanted to do after buying the donor was to remove the EGR system and clean and tune the carburetor so I wouldn't have to revisit these issues later. EGR is a gas recirculation syste...

After 154 kilometers, I discovered a malfunction in the motorcycle's electronics. The dashboard went out periodically as the power consumption increased. It was the fault of a failed alternator. After...

Lego was my favourite toy as a kid. It was all I wanted for christmas and birthdays. I wasn't very good at "playing" with my creations, I just liked building them. I read recently that the founder of...

Rio Douro...

The factory manual says that the cam bushings rarely need replacing unless there is very high mileage.  On mine, with the cams installed dry, there was a nice slip fit on the right (big) end, but...

I only have a frame and some forks from 1978 to start me off so it's not really a rebuild or a restoration. I have no history with the bike, just a burning desire to get this pile of nuts and bolts ba...

Left is the battery OME, right was a spare one, it fits in the terminal just want to make sure it's not going to cause any problems...