Upon inspection I found that both bolts holding the left caliper were gone and the caliper was just hanging there. I think I may have ridden that way for 100 miles. As it was I was 80 miles to the cl...

My right side clicker is "crunchy" and not as smooth or precise stops as the other side. It's not the damping rod or anything else below, it's the upper clicker assembly as it does it while the top is...

This post is an update to previous post. Starting the brazing over was a step in the right direction. We used a different set up for the blow torch to get it even hotter. We used a setup that allowed...

Full review coming......

The heated seats and handles are great in 4’C....

Always a good feeling! Wish they stayed this pretty....

What do you think guys? Have a great week!...

While cylinders are at the machine shop, I set to work on the gearbox. I normally replace all bearings and bushings in a transmission while it's open, whether they appear to need it or not. Shown he...

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

In this small report I will tell you how to service the fork of the Honda GL 1800 motorcycle. Since the bike is very heavy, and the fork is honestly a bit thin for such weight, it has to be serviced o...

I started taking things apart today on the GB and I got more excited as I realized how easy this bike is to work on. I'm accustomed to working on sophisticated modern sportbikes so I revelled in the e...

When it arrived the other day I just threw it on quickly to see if I'd be able to get both seats on. When it rains the water filters through and when it's hot there's plenty of air flow under you....

There was no way to mount the rack so I had to make a way. My father has a lathe in the basement that I used to make little attachment bits that I can braze into the gas tank and then screw a bolt int...

The bike refused to start and run normally. I looked in the tank and didn't like what I saw. So it's standard to remove the carburetors and valve cover....

It's time to work more closely on the front part of our Scrambler. There is plenty of space for creativity here, so I decided to do everything at once and little by little - what I had enough free ti...