30ºc ?...

A leaking oil seal and wanting to uprate fork springs were my reasons for attempting this, the basic oil change is covered well in other docs. OK, prep work first....  Record all your fork...

($249 for a piece of equipment that normally retails for $699) but after some checking around I determined that the deal was legit and placed my order on amazon.com. The retailer is Fay Myers Motorcyc...

?...

The clutch lever is currently wound in as far as it can go. I'm wondering if it's a big job to somehow get the clutch cable tightened as at the moment there's nothing left on the screw. Cheers and tha...

Swing arm has been cerakoted new bearings etc.... and I had the cam cover polished thanks to the "The zed shed" I couldn't polish it myself but managed to polish everything else that needs polishing....

Am I right in thinking that to fit my Givi V47 box I have to ditch this genuine Yamaha rack for a givi rack or drill holes in the Yamaha rack to take a universal givi plate....

I had to bang out the dent in the fender. It all went really really well without any complications. There is a long scratch where the dent used to be but that will get fixed when we get everything pai...

While I was on holiday a package arrived from Bayside Performance. I've been interested in installing a PC5 on my VFR and I finally got around to ordering one. What does it do? It overrides the moto...

Move the bike slowly so as to find the position where chain upper section is more tensioned. Set the motorcycle on the side stand. Measure chain tension at the centre of the lower section, with the...

So, a Desert Sled it is………..or will become....

After the last post I decided that it was worth ordering and fitting a new set of brushes to the starter on the ST2. At less than £10 a set and only an hours job to change them, it made no sense not t...

How cool is this! 1971 Triumph T100R Daytona…………that means twin carb, 500cc little hot rod. The bike showed up at a local shop called “The Daily Rider” in Burlington, VT. It’s a numbers matching examp...

Electronics aren't my strength but I figured out that I could wire a DPDT (Double Pole Double Throw) switch to change modes between the normal restricted mode and the hacked de-restricted mode. W...

Today I took off all of the wiring on the bike. I just had to disconnect all of the wires from their connections and I was done. I had to take the headlight off because all of the wires centralized in...

Remove the tank from the bike Now is a great time to inspect the fuel lines that are attached to the bike....

We started the hike at the altitude of 3950m and we hiked up to 4820m. The entire hike was breathtaking, literally and figuratively ?. The views were astonishingly beautiful. As we are now in the rain...