Todays fun job. The hose going onto the pump is being stubborn...how fun. Wish me luck!...

Gathered up The NC21/24 one-way clutch arrived....

I've managed to acquire (thanks Steve) a set of cases and outer covers for a T140 as a mock up so I can properly set up the new foot peg, gear change and brake locations. Even though it's hollow and t...

From Whitehaven down the West Coast Road, up past Windermere, over Kirkstone Pass, on up past Ulswater then the A66 & A595 home....

I've been working slowly on the forks for the past few weeks. A lot of distractions lately, but things are still moving. From an appearance point of view, I knew I'd be repainting parts, but the cur...

I've decided to publish my blog in short parts for your convenience. I think it would be boring to read a restoration blog the size of "War and Peace" :) Measured the oil clearances of the main and c...

Hey I've recently had problems with idle and an oil leak, fount that the front right coil has oil in the tube, anyone knows why and what seals should change? Could this be the cause of the bike not be...

I just changed the clutch it was my first time 4th gear is still slipping it stay but once you add throttle, it drops back down to three before the clutch change it didn't even recognize 4 I would hav...

 Trying to get a bit of lift with this and a set of links...

Last ride of 2016 ?...

I posted earlier that one of the studs where the seat hinge bolts to the frame was broken off when I got the bike. I drilled it out, found a suitable bolt and tapped some threads into the hole. Probl...